Quality is No-DigTec's Business
Please take a moment to browse through our gallery.
2017 - Pipe bursting 525 LF of 24" Clay to 24" HDPE
In 2017, we provided pipe bursting service placing approximately 525 LF of an existing 24" clay wastewater main with 24" HDPE DR17 via pneumatic pipe bursting method. NO-DIGTEC, LLC, successfully pipe burst the entire project in one run and completed the scope of work within 4 days.
2016 - Pipe bursting 6" to 8"
In 2016, we pipe bursted 700 feet of a collapsed 6" clay sewer main via pneumatic pipe bursting. No-DigTec, LLC overcame challenges specific to this job regarding the radius of the line, and also the increased downhill pitch of the land as the bust progressed.
2015 - Pipe bursting 18" to 24"
In 2015, we upsized a sewer pipe main from 18" to 24" near a valued community golf course. The line ran across the course, then along apartments close by. Our trenchless technology allowed the job to be completed with no damage done to the golf course or apartment community.
2014 - 24" to 28", 24" to 32", 24" to 34"
In 2014, we pipe bursted several large diameter pipelines. These lines were concrete, clay, and cast iron. For this job, No-DigTec, LLC had to fuse the pipe over a quarter mile away and drag the fused joints through the woods, over a creek, and protect all wildlife to the project site.
2014 - 12" to 18"
In 2014, No-DigTec, LLC took on an excessive bust with several limitations. These included environmental restrictions, work hours, and even work spacing.
2012 - 8" to 12"
Job Site completed at the Cotton Bowl, Dallas